How to make a jumper at home. How to make a jumper out of an ordinary chicken egg How to make a jumper out of glue

The elastic rubber ball is a wonderful toy for children. It is not necessary to buy a jumper in the store. Not everyone knows, but it can be made at home. There are several options for making a ball from various materials, study the material and choose the best option for yourself.

How to make a jumper from an egg

To create a jumper from a chicken egg, you will need:

table vinegar - 2/3 cup;
chicken egg - 1 piece.

Preparation method:

Hard boil an egg.
Dip the egg into a glass of vinegar.
Leave it there for two days.
Take out the egg and rinse under water.

Under the influence of vinegar, calcium will dissolve, and the yolk will resemble jelly. Such a ball will not jump, because when this method manufacturing, it will remain brittle.

How to make a jumper out of glue

To make a ball from glue, you can use PVA (then the ball will be matte white) or silicate glue (you will get a transparent ball). Necessary materials:

silicate glue or PVA;
ethanol;
Bowl;
latex gloves;
long stick.

Manufacturing instructions:

Pour alcohol and glue into a bowl. If you use PVA - knead in equal proportions of forty milliliters, if silicate - take glue four times more than alcohol.
Shape the mass with your hands.
Put the ball on the table, let it thicken for twenty minutes.

If you want to make the jumper colored - add a little food coloring to the mass.

How to make a rubber band jumper

From bright office rubber bands you get a pretty decent jumper. Necessary materials:

foil;
paper;
stationery rubber bands

Instruction:

Roll up a paper ball. The newspaper is fine.
Wrap the resulting balloon in foil.
Wrap the resulting ball of gum in several layers.

How to make a plasticine jumper

For a plasticine jumper, the following materials are needed:

foil;
office rubber bands;
plasticine.

How to do:

Roll a ball out of plasticine.
Wrap it with a layer of foil.
Reinforce with rubber bands.

The manufacturing method is similar to the previous one. But the plasticine ball should turn out to be more springy.

How to make a glowing jumper

This jumper will glow in the dark. For manufacturing you will need:

borax - 5 g;
dye - 10 g;
PVA glue - 10 ml;
starch - 1 tbsp;
warm boiled water - 0.5 tbsp.

Manufacturing instructions:

Pour water into a bowl, stir in borax.
Add dye to the mixture.
In another bowl, pour glue, 5 ml of borax and add starch.
Wait twenty minutes for a reaction to occur.

It will be faster and more practical to buy a jumper in a store. But, made by hand, it will become a valuable toy. You can bring your own peculiarity to it with the help of dyes, a combination of colors of stationery rubber bands. And if the jumper glows in the dark, then not every purchased ball can do it! Connect your imagination and make a bouncing ball with your own hands.

The jumper is a popular children's toy in the form of a ball that bounces high when thrown on the floor. Children are pleased not only with its funny jumping ability, but also with rich bright colors.

You can buy such a toy in the store, or you can make it yourself. Firstly, save money, and secondly, you can captivate the child. He will be happy to participate in the manufacture of the toy and choose the color for coloring himself.

To create a glue jumper, you need a fairly small and simple list of ingredients that can be bought at any store and pharmacy.

First of all, you need:

Stationery glue, which can be bought at any store for school and office supplies.
Ethyl alcohol 90-95% - sold in pharmacies.
In manufactured goods, you will need to purchase a liquid dye of the desired color.
You will also need a container for mixing the ingredients and a stick, you can use an ordinary unnecessary pencil or ice cream stick.

How to make a glue jumper step by step

The cost of the toy will be minimal, and the child will get a lot of pleasure from both the manufacturing process and the game.

The first thing to do is pour the stationery glue into a mixing container. Then add liquid dye in the same amount as the glue.
The next step is the addition of alcohol, the amount is the same as glue. All components are thoroughly mixed with a stick.
The mixture will quickly begin to harden, so you can pick it up and roll it into a ball. It is better to do this with protective gloves so as not to get dirty.
The ball should dry out, and after 10 minutes you can play with it. He will jump no worse than the purchased one.

For those who want to make an unusual bright jumper, you can use luminescent as a dye, it will glow brightly in the dark.

VIDEO INSTRUCTION

Another interesting technique is to paint the pieces in different colors, and then combine them into one ball, it will turn out to be multi-colored and unusual.

Girls love everything shiny, so you can make a ball of sparkles for them. In this case, you can not add a dye, but limit yourself only to adding sparkles when kneading.

It is worth noting that this interesting toy can be made not only from stationery glue, but also from other inexpensive handy materials - paper, eggs, stationery gum, plasticine.

Do you know that everyone's favorite jumper is over a thousand years old? different peoples used the ball for rituals and, of course, for games. But the rubber "jump" has become really popular. And he opened it to the world by bringing it from still unknown America. Until now, the elastic bun remains a favorite toy for kids and adults. Do you want to surprise your children and give them not only a bouncing ball, but also unforgettable moments of joy of joint creativity? Don't know how? Make a jumper at home! You will even be surprised how simple it is.

Jumper "Elementarus"

All you need is that ethyl alcohol and It is from these two components that the jumper will consist. It remains only to take a plastic cup into which you need to pour the ingredients, and a stirring stick. So we come to the actual answer to the question: "How to make a jumper at home?".

When all these items are at your fingertips, mix glue with alcohol in a 4:1 ratio. They should be mixed until the mass begins to thicken, so much so that it will be difficult to move it. Take the mixture turned into rubber, rinse under running water and form a ball.

It's time to start testing for jumping ability. Hit the ball on a hard surface and catch it back!

Don't stop there!

Once you understand how to make a bouncing ball at home, you can change the bouncing ball recipe to your liking. You will understand how chemical composition affects the jumping ability, texture, color and other characteristics of the product. Who knows, maybe you will add some magic ingredient to the elastic composition, and you will get such a unique toy that even get a patent! Here is one interesting example how to make a ball.

Jumper "Experimentarus"

For its manufacture you will need:

Potato or corn starch;

Glue (if you take silicate, it will give the ball transparency);

Warm water;

Luminescent dye (you can use absolutely any paint if you wish).

A couple of plastic cups or other containers for mixing reagents.

Pour 2 tablespoons of warm water into one glass and add half a spoon of borax to it, stir until the powder is completely dissolved. At the same stage, add dye if you want to make the ball colored.

Pour a spoonful of glue and half a spoonful of the already prepared mixture into the second glass. Pour in a spoonful of starch.

Important: do not mix! Allow the ingredients to interact on their own for 10-15 seconds, and only then assist the bonding reaction by mechanical mixing.

As soon as the mixture has hardened so much that it will be difficult to move it, remove the substance from the cup and start sculpting the ball with your hands.

At first the mass will be sticky and painting hand(if you wear rubber gloves, you will not get dirty), but this effect will disappear as it hardens. Once this happens, the jumper is ready!

In general, you know how to make a jumper at home. But that is not all!

Focus

Roll up some balls different colors. Divide each into several parts. Take pieces from different balloons and combine them into one ball. You will get a fantastic "Jumper" that will not leave anyone indifferent!

How it works?

The glue contains the polymer polyvinyl acetate (PVA), which attracts everything to itself, reacting with borax.

Starch contains amylopectin and gives the toy elasticity, helps to strengthen the connection of molecules, at the same time giving the surface of the product a pleasant smoothness and elasticity. At the same time, the ball retains its shape much better than without starch.

Borax also promotes bonding of ingredients and strength.

Other options

Are you interested in alternative ways to make a jumper? From plasticine, paper, eggs, stationery rubber bands and ... But this will be discussed on another page.

Childhood toy? Of course, jumper! All children dream of this miracle ball, and today we have the opportunity to make it at home. Keep children away from the creation process so that they do not harm their health, because we will use dangerous ingredients.

How to make a glue jumper?

To make a jumper at home, we need:

silicate glue;
- ethanol;
- rubber gloves;
- bowl and stirrer.

The creation process is very simple, but you need to do it carefully so that everything works out right.

1. Pour silicate glue into a bowl and add alcohol there. Do not forget about the proportions, according to the rules it should be 4 to 1. For 4 spoons of glue - 1 spoon of alcohol.

2. Mix thoroughly. A very thick mass should form.

3. We put on gloves and take our mass in our hands. We roll into a ball. This stage can take a long time, because it needs to harden and become dry.

Your jumper is ready!

IMPORTANT! Be careful with alcohol. Be sure to use non-torn rubber gloves to protect your hands from injury.

How to make a jumper?

It would seem, well, why make a jumping ball with your own hands, if for only fifty rubles you can buy a chic bright jumper, decorated with a portrait of a cute cartoon character? There can be only one answer to this question - the main pleasure of making a jumper with your own hands lies in the very process of its creation, and not in the result.

If you also want to “conjure” a little in the home kitchen with your child, carefully study our instructions, stock up on everything you need and feel free to start creating your first jumper.

How to make a do-it-yourself bouncing ball

Method one

To make a jumper you will need:

Medical disposable gloves;
Glass jar or old cup;
Stirring stick (glass or metal is better, but a regular pencil will do);
Disposable syringe with a volume of ten cubes;
A bottle of medical ethyl alcohol (96%);
A few vials of silicate glue (also called clerical glue).

Procedure:

Put on gloves. Pour 80 ml of silicate glue into a jar or cup (measure the right amount of glue with a syringe without a needle). If desired, you can tint the glue with a few drops of liquid aniline paint or colored ink. In order for the ball to shimmer and shimmer in the light, you can add small sparkles to the glue, intended for designer manicure.
Add 20 ml of alcohol to the container. Note: you can use other amounts of glue and alcohol - the main thing is to keep their volume ratio of 4:1.
Start intensively mixing the ingredients in a container, and the mixture will begin to thicken before your eyes.
When the mixture thickens enough and gathers into a single lump, remove it from the container and start rolling it between your palms, trying to form an even ball out of it.
It will take a long time to roll this elastic lump - almost until it is completely hardened.
When the jumper stops sticking to your hands, put it on a clean glass and let it dry completely. After that, you can already start his "sea trials".

Method two

There is another way to make some kind of real jumper. In fairness, it must be said that this will not be a full-fledged bouncing ball, but rather a funny rubber egg. Do you want to try making it? Then prepare a chicken egg and a bottle of ordinary table vinegar.

Operating procedure:

Boil a hard-boiled egg, put it in a half-liter glass jar, pour vinegar up to the very neck of the jar. Put the jar on the far shelf for three days.
During this time, the shell on the egg will dissolve, and the egg itself will become very elastic and, as it were, rubber.
After the specified time, you just have to remove the "rubber" egg from the jar, rinse it under the tap and enjoy the result.